-    +----------------------------------------------------------------+
     |                       The Insight BBS.                         |
     |          File area # 38 .. VX_Net Release 3.14 Files           |
     +----------------------------------------------------------------+
 
 The files below make the new VX_Net release 3.14.
 
 The four main .EXE files are self unpacking files that should be run from
 the hard disk of a system onto blank HD formatted floppies... ie, if the .EXE
 files were on drive C: and a blank formatted High Density diskette is in Drive
 A:, you would do the following....
 
        1) Change to drive A: (A: {return})
        2) run the .EXE from drive C: (C:VX314_1 -D {return})
 
        Note that the -D switch is needed when unpacking these files.
 
 You should ensure that you have 6 blank High Density floppies, formatted with
 no system tracks and no volume label. You should also have a copy of the
 Combined DOS pack (also available below).
 
 NOTE: Before installing the upgrade, we would advise that a full system
 backup is taken and verified for data integrety. We would also recommend that
 if possible a test installation is carried out before upgrading a live site,
 so that you can familiarise yourself with the changes in the new installation
 routine (as there are quite a few).
 
 For those that would like the upgrade on floppy disk rather than downloading
 the files, please send 6 * 3.5' High Density floppy disks to....
 
        VX-Net 3.14 Upgrade
        System Support Group
        Mitsubishi Electric PC Division
        3500 Parkside
        Birmingham Business Park
        Birmingham
        B37 7YS
 
 Please also enclose a covering letter explaining what the disks are for.
 Disks received that are the wrong format/not enough/faulty will be returned
 unused, so to save time, please ensure that the correct type/quantity/quality
 of disks are sent.
 
 A '*' indicates that the file is new since your last log-on.
 
 Filename       Size   Date  * Description
 --------       ----   ----  - -----------
VX314_1.EXE   660628 05-03-91  VX_Net 3.14 Install Disk (1 of 3)
VX314_2.EXE   544939 12-03-91  VX_Net 3.14 Install Disk (2 of 3)
VX314_3.EXE   723112 09-29-90  VX_Net 3.14 Install Disk (3 of 3)
VX314_WS.EXE  241344 02-25-93  VX_Net 3.14 Default W/S Boot Disk.
CDP1.EXE      793970 09-03-91  Combined DOS pack Rel 9 - Disk 1 (DOS 4)
CDP2.EXE      676698 09-03-91  Combined DOS pack Rel 9 - Disk 2 (DOS 3+4)
 
 
 For those that don't want the full install/upgrade pack, some of the new
 files are below. Please however be extremely careful when upgrading parts
 of the network software when the rest of the software is remaining at a lower
 release. If problems are encountered, we would advise that the full upgrade
 as above be installed before the System Support Group are consulted.
 
 Filename       Size   Date  * Description
 --------       ----   ----  - -----------
BOOTSRV.EXE    20560 09-24-90  Ver 3.02 - doesn't hang with new nodes
ETHERCOM.EXE   20824 09-19-90  Ver 3.1 - doesn't hang with new nodes
ETHERCOM.SYS   20824 09-19-90  Ver 3.1 - doesn't hang with new nodes
 
CONSOLE.SYS    21602 09-18-90  Ver 3.14 - for server
 
ETHERNET.SYS   11939 09-17-90  Ver 3.15 - for new WD cards or Windows 3
ETHER592.SYS   15091 12-03-91  Ver 3.17 - For Windows 3 + XEN-LS support.
 
AMLOAD.EXE     14011 01-21-92  Ver 4.05 - For XEN-LS 486 - to get full 192k
 
EXPORT.EXE     28129 09-20-90  Ver 3.15 - Better NETBIOS compatability
ENETBIOS.EXE   25470 02-06-91  Ver 3.15 - Better NETBIOS compatability
 
NETDISK.SYS    11237 09-20-90  Ver 3.2 (for remote boot WD cards + WIN386)
 
NETGEN.BAT        87 02-26-90  Runs NETGEN.EXE after setting path for SERVER
NETGEN.EXE      1644 09-18-90  Ver 3.20 - .EXE loader
NETGEN.000    199702 09-18-90  Ver 3.20 - Main Overlay
NETGEN.001    117417 09-18-90  Ver 3.20 - Gateway module Overlay
NETGEN.002     96449 09-18-90  Ver 3.20 - Resource module Overlay
NETGEN.ZIP    183404 09-18-90  Ver 3.20 - all NETGEN.* files in one
 
SERVER.SYS      8447 09-19-90  Ver 3.31.02 - VX_FT + LANstation support
 
STAT.DSK       27648 08-07-86  Master Soft-boot disk for XEN and XEN-i WS's
 
MSDOS32.ZIP   227535 01-07-93  MSDOS32.DSK to correct problem with common disk
                               supplied with VX-NET 3.14 (REF IPB 2075)
 
 The files below are not a part of the VX_Net 3.14 upgrade/install pack,
 but they may be of use on VX_Net 3.14 systems. Note however that software
 that is marked as being beta release will not be supported until a final
 release version is made available.
 
 
 Filename       Size   Date  * Description
 --------       ----   ----  - -----------
VX314R1.DOC    38735 10-04-90  VX-Net 3.14 Release Notes - Windows Word format
D5WSSUPP.ZIP   21418 06-20-91  DOS 5 Workstation Support Disk for VX-Net 3.14
INTFIX.COM        17 08-14-91  BIOS patch for Epson EL3s (load in AUTOEXEC.BAT)
QI900.ZIP     182337 08-21-90  Working boot disk files for a QI 900, unzip onto
                               a blank DOS 3.3 system disk.

      

Back to the File Area Index

Copyright 1996 - Mitsubishi Electric PC Division